Outdoor Furniture Materials Guide

STAINLESS STEEL

1. Wash regularly with clean fresh water, mild detergent and a micro fiber cloth.
2. After washing rinse with clean water and wipe the surface dry with cloth, go with the direction of the grain on the brushed stainless steel.
3. Do not use abrasive cleaners or a scouring pad of any type as this will cause excessive wear and dull the finish.

NewAge recommends using a multi-surface cleaner or stainless steel cleaner to remove spots. If you have oxidation, apply clean water with a cleaning sponge and rub gently in the direction of the grain.

POWDER COATED ALUMINUM PARTS

1. Clean with water and a mild liquid detergent to remove any dirt or splashes.
2. A microfibre cloth or sponge should be used to wipe over the surfaces of the furniture.
3. Removing surface water with a drying cloth will help avoid water spots.
4. Avoid using any abrasive cleaning agents on materials, as these could mark the surface of the powder coat.

This material is scratchable, do not use steel wool or Scotchbrite on powder coated surfaces.

WOVEN ROPE

1. Clean with water and a mild liquid detergent to remove any dirt or splashes.
2. A microfibre cloth or sponge should be used to wipe over the surfaces of the furniture.
3. Removing surface water with a drying cloth will help avoid water spots.
4. Avoid using any abrasive cleaning agents on materials, as these could mark the surface of the woven rope.

PREMIUM FABRIC

1. Before cleaning the fabric, brush away the loose dirt first.
2. Always use a mild cleanser.
3. For cushions exposed to direct sunlight or the everyday elements, we recommend storage of cushions when not in use.
4. Do not use solvent type cleaners, do not use machine wash or dry clean.

Vacuum regularly, and avoid leaving in direct sunlight for long periods of time.